See the chapter .

The overflow guard starts pumping out the water and turns off the water supply if the water level in the dishwasher exceeds the normal level. If the overflow guard is triggered, F54 (Overfilling water) appears on the display. Turn off the water tap and contact your nearest service centre. (To avoid water leakage outside the dishwasher, do not remove the plug from the wall socket until the water tap on the supply line has been turned off!)

Store the dishwasher above freezing temperature and avoid long transport distances in very cold weather. Transport the dishwasher upright or laying on its back.

Before transporting a used dishwasher, or before prolonged storage, water must first be removed from the machine.

The outer packaging protects the product during transport. The packaging material is recyclable. Separate the different packaging materials to help reduce raw material use and waste. Your dealer can take the packaging for recycling or direct you to the nearest recycling centre. The packaging is comprised of:

• Corrugated cardboard made from up to 100% recycled material.

• Expanded polystyrene (EPS) with no added chlorine or fluorine.

• Supports made from untreated wood.

• Protective plastic made from polyethylene (PE).

The dishwasher is manufactured and labelled for recycling. When the dishwasher has reached the end of its service life and is to be disposed of, it should immediately be made unusable. Pull out the power cable and cut it as short as possible. Remove the light source/light sources.

Contact your local authority for information about where and how your dishwasher should be correctly recycled.

Explanation of symbols appearing on the appliance.

In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral content). Hard water leaves a white coating on dishes and the dishwasher.

The first time the dishwasher is switched on, it is important that you choose the right settings to ensure good dishwashing results. See page .

Set up:

• Rinse aid

• Water hardness

• TAB (All-in-one detergent)

• Automatic detergent dispensing

Drying is faster and a better result is achieved if you use rinse aid. You will also achieve a better dishwashing result with clear and spotless dishes.

Top up the rinse aid compartment with rinse aid if you have selected Rinse aid 3:01 - 3:05.

1. Open the rinse aid compartment lid.

2. Carefully top up with rinse aid to the level marked MAX.

3. Wipe up any splashes of rinse aid around the compartment.

4. Close the lid firmly.

Add salt to the salt compartment if you have selected Water hardness 4:01 - 4:09.

1. Remove the salt compartment lid by turning it anticlockwise.

2. Place the funnel supplied with the dishwasher in the salt compartment top-up hole. First, pour in about 1 l of water.

3. Add enough salt to fill the salt compartment (max. 750 gram). Use special dishwasher salt.

4. Wipe up any excess salt so that the lid can be screwed on firmly.

Fill the automatic dosing compartment with dishwasher detergent gel if you have activated the Automatic detergent dispensing setting.

1. Open the lid of the automatic dosing compartment for dishwasher detergent gel.

2. Carefully add dishwasher detergent gel to the level marked MAX.

3. Clean up any excess dishwasher detergent gel outside the compartment.

4. Close the lid firmly.

When using a dishwasher in a residential setting, less energy and water are generally used compared to washing the dishes by hand.

Some cookware is not dishwasher safe. This can be for several reasons. Some materials cannot withstand high heat, others can be damaged by dishwasher detergent.

Exercise caution with, for example, handmade items, fragile decoration, crystal/glassware, silver, copper, tin, aluminium, wood and plastic. Look for the "Dishwasher safe" marking.

Load the dishes carefully to ensure the best washing and drying results with the lowest possible energy and water consumption. Give your dishwasher the best chance to reach and clean all surfaces, as well as to dry the dishes as thoroughly as possible.

• All dirty surfaces should face inwards and downwards!

• Dishes should not be placed in or on each other.

• Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important for plastic items.

• Make sure small items cannot fall through the dishwasher basket; place them in the top cutlery tray.

The dishwasher is equipped with a top cutlery tray, an upper basket and a lower basket.

The appearance of the baskets may differ depending on the dishwasher setup.

The top cutlery tray has space for cutlery, ladles, whisks, serving cutlery and similar items.

Place glasses, cups, bowls, side plates and saucers in the upper basket. All dirty surfaces should face inwards and downwards! Wine glasses are placed on the wine glass shelf and knives are placed in the knife stand on the right.

Place plates, side plates, serving dishes and pots in the lower basket. Cutlery can be placed in the cutlery holder.

You have two options for adding detergent – manual or automatic. To activate Automatic detergent dispensing, see the chapter . The manual detergent compartment can be used as a supplement even when Automatic detergent dispensing is activated (for bleach, for example, or if the automatic dosing compartment is empty).

Follow the instructions on the detergent packaging. This dishwasher is fitted with a water softener, so use detergent and rinse aid doses suitable for soft water.

Do not add detergent to the manual detergent compartment when using automatic detergent dosing! Too much detergent can result in less effective dishwashing and also entails greater environmental impact.

Open the door and press . Also turn on the water tap if it is turned off.

Select a program to suit the type of dishes and how dirty they are. Eco 55° is always pre-selected.

Press the desired program until it is activated, which is indicated by an indicator light.

Press the options to activate them. (The available options vary between programs.)

Press . The display will start to flash, indicating that the dishwasher is ready to start. Close the door properly, otherwise the dishwasher will not start.

To remote start the dishwasher, see the chapter .

The status light on the bottom part of the dishwasher indicates that a program has started.

Open the door. The dishwasher stops automatically. Add the dishes and close the door. After a while, the dishwasher continues the program.

If the dishwashing program was remote started, the interrupted program will continue once the door is closed. You can monitor the dishwasher using the ConnectLife app and remote stop the program, although you will not be able to remote start it again.

If the dishwasher is turned off due to a power failure when a dishwashing program is running, the program continues when power is restored. If the power is cut during drying, the program is interrupted.

If the dishwashing program was remote started and has not ended, the program will continue once the power is restored. You can monitor the dishwasher using the ConnectLife app and remote stop the program, although you will not be able to remote start it again.

The end of the program is indicated by one short signal from the buzzer. The chapter describes how to change this function.

Moreover, the end of the program is indicated by the status light turning off.

Once the dishwasher door is opened and the program has finished "End" appears on the display.

The dishwasher switches off automatically after the program ends. Shut off the water tap after each use.

• Fully load the dishwasher.

• Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important for plastic items.

• Top up with rinse aid or increase the rinse aid dosage setting.

• Activate the SmartDry option.

• Allow the dishes to cool before unloading the dishwasher.

Hot porcelain is more fragile. Leave the dishes to cool in the dishwasher before unloading them.

Unload the lower basket first to avoid any water drops from the upper basket falling onto the dishes in the lower basket.

You can remote control this dishwasher with your smartphone/tablet. Connect the dishwasher to your wireless network to be able to remote control and start the dishwasher using the ConnectLife app. The app can be used to find information, change settings, start a program and monitor the dishwasher. (The dishwasher can always be used without the app.)

• Your smartphone/tablet must be connected to the internet.

• The router in your wireless network must be connected to the internet and the dishwasher must be in range of your wireless network.

• Use your smartphone/tablet to download the ConnectLife app from the appropriate app store or scan the QR code below.

  

• You will find the dishwasher's QR code (and the AUID code) on the serial number plate.

  

Connect the dishwasher to your wireless network and pair with your smartphone/tablet.

• Open the ConnectLife app and register an account.

• Go to Appliances. Click on Add appliances or the + button. Select Home appliances.

• Scan the dishwasher's QR code (see the serial number plate). Follow the further instructions in the app.

• Open the dishwasher door and press .

• On the dishwasher's control panel: Press to activate the WiFi module.

• On the dishwasher's control panel: Press and hold for 3 seconds to start connecting. C appears on the display, after which the display starts counting down.

The dishwasher's network symbol is shown on the display when the dishwasher is paired with a smartphone/tablet. You can use the ConnectLife app to monitor the dishwasher and change settings.

To remote start the dishwasher, press and then . APP will flash on the dishwasher's display. Close the door. The status light will flash slowly, indicating that remote start is activated.

In the ConnectLife app, select and start a program.

If the door is not closed within 2 minutes, the machine switches off.

Pair more devices/users with the dishwasher.

• Open the ConnectLife app and log in to your account or register a new account.

• Go to Appliances. Click on Add appliances or the + button. Select Home appliances.

• Scan the dishwasher's QR code (see the serial number plate). Follow the further instructions in the app.

• Open the dishwasher door and press .

• On the dishwasher's control panel: Press and hold for 4 seconds to start connecting. P appears on the display, after which the display starts counting down.

After connecting the dishwasher to your local network, you can deactivate the WiFi connection. You can then reactivate the WiFi connection to reconnect to the same network.

• On the dishwasher's control panel: Press and hold for 8 seconds to deactivate the WiFi connection. Off appears on the display.

• On the dishwasher's control panel: Briefly press to reactivate the WiFi connection. On appears on the display.

Remove all connected devices/users.

• On the dishwasher's control panel: Press and hold for 4 seconds, then press and hold for 3 seconds. UnP appears on the display, after which the display starts counting down.

When the rinse aid needs topping up, the above symbol lights on the display.

1. Open the rinse aid compartment lid.

2. Carefully top up with rinse aid to the level marked MAX.

3. Wipe up any splashes of rinse aid around the compartment.

4. Close the lid firmly.

After topping up, it may take a while before the symbol goes out.

When the salt needs topping up, the above symbol lights on the display.

1. Remove the salt compartment lid by turning it anticlockwise.

2. Place the funnel supplied with the dishwasher in the salt compartment top-up hole. (Water is only needed the first time.)

3. Add enough salt to fill the salt compartment (max. 750 gram). Use special dishwasher salt.

4. Wipe up any excess salt so that the lid can be screwed on firmly.

After topping up, it may take a while before the symbol goes out.

When the dishwasher detergent gel has run out and needs to be refilled, the above symbol appears on the display. (You can run 1-2 programs before the compartment is completely empty.)

1. Open the lid of the automatic dosing compartment for dishwasher detergent gel.

2. Carefully add dishwasher detergent gel to the level marked MAX.

3. Clean up any excess dishwasher detergent gel outside the compartment.

4. Close the lid firmly.

The filter traps larger food particles, which cannot get past the drainage pump. Empty the filter when necessary. It should be cleaned at regular intervals depending on how often the dishwasher is used.

1. Turn the locking ring anticlockwise and lift the filter straight up.

2. Empty and clean the filter.

3. Refit the filter and turn the locking ring clockwise to its stop position. Check that the edges seal properly.

Holes and bearings can sometimes become blocked. Remove any debris using a pin or the like. The spray arms also have holes underneath.

To facilitate cleaning you can remove the spray arms. Remember to fit them firmly back into place afterwards.

• Connections to electricity, water and drainage must be performed by a qualified professional.

• Always follow applicable regulations for water, drainage and electricity.

• Take care during installation! Wear protective gloves! There must always be two people!

• Place a drip tray on the floor beneath the dishwasher to prevent damage from any water leaks.

• Before screwing the dishwasher into place, test the dishwasher by running the 1h 65° program with the Speed wash option. Check that the dishwasher fills with water and drains. Check also that none of the connections leak.

• The recess and connection dimensions are included in the separate installation instructions. Check that all dimensions are correct before starting the installation. Note that the height of the cover door can be adjusted to match other fittings.

• Make sure the area on which the dishwasher is to be installed is firm. Adjust the adjustable feet so that the dishwasher is level.

• If the dishwasher is built-in the surrounding furnishings must be resistant to any condensation from the dishwasher.

• Mount the protective film beneath the worktop and up around the edge. The function of the protective film is to protect the worktop from moisture. (The protective film is in the enclosed plastic bag.)

• Check that the machine is installed such that the door opens freely, otherwise door lock functionality may be disrupted.

• Note that the door springs may need adjusting after a cover door has been fitted. Adjust the left and right door springs equally until the door is evenly balanced.

The drainage hose may be extended by a maximum of 3 m (the total length of the drainage hose must not exceed 4.5 m). Any joints and connecting pipes must have an internal diameter of at least 14 mm. However, the drainage hose should ideally be replaced with a new hose without joints.

No part of the drainage hose may be more than 950 mm above the bottom of the dishwasher.

Attach the drainage hose with a hose clamp. Ensure that the drainage hose has no kinks.

Use only the inlet hose supplied with the dishwasher. Do not re-use old or other spare hoses.

The supply pipe must be fitted with a water tap (stopcock). The water tap must be easily accessible, so that the water can be shut off if the dishwasher has to be moved.

Once the installation is complete, turn on the water tap and allow the pressure to settle for a while. Check that all connections are watertight.

Information about the electrical connection can be found on the serial number plate. This specification must match the electricity supply.

The dishwasher must be connected to an earthed socket.

The electric wall socket must be placed outside of the installation area to be easily accessible after installing the dishwasher. Do not use an extension cord!

Press and hold and for 3 seconds to show Number of program cycles on the display.

(If the dishwasher has completed more than 999 cycles, the number of thousands is displayed followed by the number of cycles up to 999. For example: 1234 cycles is displayed as 001 followed by 234.)

Information about your product can be found at www.gorenje.com, where you will also find a link to the European Product Database for Energy Labelling, EPREL. Or else visit https://eprel.ec.europa.eu directly. Follow the instructions to search by model name.

See the information on the serial number plate. Make a note of the model name (3).

This appliance contains a light source/light sources of energy efficiency class D. Light sources are available as spare parts and can be replaced by your nearest service centre or a qualified professional.

Information about this product can be found in the European Product Database for Energy Labelling, EPREL, and can also be ordered by e-mail dishwashers@appliance-development.com.

The request should include the details on the serial number plate. Include the article number (1), the serial number (2) and the model name (3).